3.7V-96V 10A Battery BMS Charger Automatic Charging Controller Module 71*50mm

Item specifics
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is ... Read more
Installation Size: 2*3mm
Brand:
Unbranded
MPN:
Does Not Apply
Battery Voltage: 1.5V~120V Size: approx. 71*50mm
Display Accuracy: 0.1V Voltage Error: ±0.2V
Load: 10A Control Accuracy: 0.1V
Type: Type: Charging Module + Cover (optional) Specification:

Brand new

Type: Charging Module / Charging Module + Cover (optional)

Size: approx. 71*50mm

Installation Size: 2*3mm

Display Accuracy: 0.1V

Control Accuracy: 0.1V

Voltage Error: ±0.2V

Battery Voltage: 1.5V~120V

Load: 10A

Fine workmanship and good performance.

Easy to use.

Long service life.



About the Load Cut off and Turn on:

For example: 12V battery set under voltage (the load cut off voltage) is 10.5V,

When the voltage is to 10.5V or below 10.5V, This controller board delay 6 second then cut off the load.

if the voltage is rise and over 10.5V within 6 second, the load will not cut off and keep turn on.

The overvoltage(the load turn on voltage) can set between 10.6V-15V, you can set it according your charger voltage or using voltage to set it.

Press the start and stop key together, the LED will display 888, that mean reset the controller successful.



Package included: (depend on your option)

A: 1 x Charging Module + Cover

r